Splenvue S12E UV Disinfector

Electrum series S12E, fully featured UV lamp provides disinfection for water supplies, for domestic and commercial use.

£470.94 £392.45
In stock
SKU
Splenvue S12E
Product Tags :

Splenvue UV Sterilisation System - S12E

UltraViolet sterilisation systems destroys bacteria, virus, mould & algae without the use of heat or chemicals.

UV sterilisation has benefits over other disinfection methods, UV light does not add anything to the water, such as colour, odour, taste or flavour. UV sterilisation is also fast, as it requires only a fraction of the contact times required by other disinfection methods.

This system can be used for the following applications: Drinking water, food processing, medical, industries.

Technical Specification:

  • Flow Rate: 15gpm (3.4 m3/Hr.)
  • Inlet/Outlet port: 3/4” FNPT with 1” MNPT
  • Reactor: 96 cm x 6.5 cm (37.8” x 2.5”)
  • Ballasts Controller: 17.6 cm x 7.4 cm x 5.3 xm (6.9” x 2.9” x 2.1”)
  • Voltage: 100 - 250V /50 - 60Hz
  • Lamp Watts: 39 W
  • Power Consumption: 48W
  • Max Current: 0.42 A

Control:

  • Lamp Life Time - Countdown
  • Lamp Replacement Reminder
  • Total Running Days
  • Reset Timer
  • Audible Alarm
  • Lamp Operation Indicators

Operating Parameters: 

  • Max. Operating Pressure: 125 psi (8.62 bar)
  • Ambient Water Temperature: 2 - 40° (36 - 104°)
  • Iron: < 0.3 ppm (0.3 mg/L)
  • Hardness: < 8 gig (120 mg/L)
  • Turbidity: < 1 NTU
  • UV Transmittance: > 75%

General: 

  • 4-Log (99.99%) Reduction in bacteria, viruses and protozoan cysts
  • Electropolished 304SS Reactor Chamber
  • Installation: Vertical or Horizontal
Write Your Own Review
You're reviewing:Splenvue S12E UV Disinfector
Your Rating