RO-1 UV 6 stage reverse osmosis water filter system including UV final stage and pressurised water storage tank for aquariums, drinking water, pharmaceuticals, plant propagation and window cleaning.
The Vyair RO-1-UV pure water system combines six stage filtration with add-on ultraviolet water purification unit for great tasting drinking water (shown in image).
Our six stage under-sink filtration system combines high quality pre-filtration with ultraviolet purification technology, which produces a complete water quality system for residential applications.
The Vyair RO-1-UV filter system removes sediment, rust, dirt, taste, odours and many other water contaminants that may be present in the water.
The last stage water is purified in the UV chamber, producing drinking water that is crystal clear and free from disease causing pathogens including bacterial, viral or cystic contamination.
Economical and safe, the VYAIR Ultraviolet Purifier offers rapid water treatment without the use of heat or dangerous chemicals.
The Vyair Ultraviolet Water Purifier utilizes a germicidal ultraviolet lamp that produces short wave radiation lethal to bacteria, viruses and other micro-organisms present in water.
Recommendations for Use:
Complete Package Contains:
ADVISORY: Avoid cheap water filtration systems and cartridges which have no testing credentials or certifications, and often leach harmful chemicals into the water which are linked to cancer, birth defects and infertility. In addition, cheap components may also lead to membrane fouling, leaks and general poor performance. Instead, always choose Vyair tested and certified water filtration systems and cartridges.
STAGE, PART#, COMPONENT, FUNCTION:
Limited Warranty: Manufacturer warrants that this product is free from defects in materials and workmanship. This warranty, together with any and all warranties implied by law, shall be limited to a period of twelve (12) months from the date of original purchase. This limited warranty does not apply to failures that result from abuse, misuse, alteration or failure to properly comply with installation, or cartridge change instructions. We strongly recommend adding to all point of use filtration systems a Pressure Limiting Valve (contact us for further details) to guard against unwanted extreme water pressure events pressure increases, surges, and water hammer which could occur in the water pipes. Not having one installed could mean that if you ever did have to claim damage caused by a burst water filter system, the claim will be denied.
Do not run a pump for more than 4 hours continuously. This is to stop the pump from overheating and becoming damaged. To achieve this, we would suggest installing some form of timer, so that after 4 hours of operation the pump has a 15-30 minute break. This will enable the pump to cool down.
The warranty for the pump would be null and void if no timer is used. If there is an issue with the pump we would ask for evidence of a timer being used to allow the item to be covered by the warranty
Do not allow the pump to run dry (without an active water source) as this will damage the pump. The only time that we would suggest running the pump without an active water supply is if you have a low pressure switch wired into the pump, as this will automatically switch the pump off when the incoming water flow is turned off.
The warranty for the pump would be null and void if used in an application of running dry without a low pressure switch- We will ask for evidence of use of a low pressure switch to receive a warranty replacements of the pump
We suggest that the pumps are permanently mounted. This is to stop any potential for the pump to vibrate and become damaged.
We will ask for evidence of how the pump is mounted for the item to be covered by its warranty.
|Is Free Shipped||No|