RO-1 5 Stage Pumped Reverse Osmosis Drinking Water System 50gpd (8lph)

From £164.99

  • Point of use (POU) systems filter out bad tastes, colours, odours and particulates
  • Household designed to easily fit into kitchen space and under sink cabinets
  • RO booster pump guarantees optimum filtration by providing the RO membrane with ideal pressure
  • Up to 200 litres / 350 pints per day of refined drinking water for your home

SKU N/A Category

The Pumped Reverse Osmosis System is pre installed with RO booster pumps to supply the RO membrane with ideal pressure, ensuring optimum output from the system. This variation is a private water supply and household designed reverse osmosis system that achieves pure drinking water through carbon post filtration and the choice of UV sterilisation.

Ultraviolet sterilisation is a well established process to rapidly disinfect water without the use of heat or chemical processes such as chlorination or ozonisation. UV does not add anything to water such as undesirable colours, tastes or odours and creates no by product.

The system is rated at 50 gallons per day and contains an option to include a final polishing stage by utilising ultraviolet sterilisation. A modern and far more advanced way to treat water than using harsh chemical processes such as chlorination and ozonisation. All RO systems can be purchased with customisable consumables. Some are designed to target specific contaminants, eg. Chloramine, and others are rated at increasing efficiencies depending on the quality of your source water, and how long you would like your filters to serve for.

Pump Care

Do not run a pump continuously for more than 4 hours or allow a pump to run dry. Doing so will cause the pump to overheat and become damaged. So that you do not need to manually turn the system off every 4 hours, we suggest installing a timer to give the pump a thirty minute break so that it will cool down. We also recommend you install a low pressure switch before your pump so that it does not run dry with little feed flow. A pump should also be mounted using the built in mounting holes to stop the pump from getting damaged through uncontrolled vibration.

If any of the above directions are not followed, the warranty of the pump will be null and void. We will ask for evidence of you following the above directions and will not issue a warranty replacement without any.

System Specifications:

  • System Dimensions mm – H 440 x W 360 x D 200
  • System Weight kg – 13.8
  • Inlet Connection – 1/4″ Pushfit
  • Outlet Connection – 1/4″ Pushfit
  • Tank Dimensions mm – H 380 x Diameter 290
  • Tank Weight kg – 3.9
  • Tank Capacity l (G) – 6.5 (1.7)
  • Tank Material – Stainless Steel

 

Membrane Specifications:

  • Permeate Flow Rate gpd (lph) – 50 (8)
  • Active Area m² – 0.36
  • Stabilised Rejection Rate – 97%
  • Maximum Recommended Recovery – 33%
  • Operating Pressure bar (psi) – 3 – 6 (43 – 87)
  • Operating Temperature °C (°F) – 5 – 45 (41 – 113)
  • Feed Flow Rate lpm – 1.9 – 9.1
  • Free Chlorine Tolerance ppm – <0.1
  • PH Range – 3 – 10
  • PH Range (Chemical Cleaning) – 2 – 11
  • Maximum Feed Silt Density Index SDI – 5
  • Maximum Feedwater Turbidity NTU – < 1
  • Recommended Shelf Life – 2 Years

 

Pump Specifications:

  • Pump Model – TYP-2500
  • Flow gpd (lph) – ≥ 200 (31.5)
  • Inlet Pressure bar (psi) – 2.1 (30)
  • Working Pressure bar (psi) – 5.6 (80)
  • Voltage V DC – 24
  • Power Supply Voltage – 24
  • Working Current A – ≤ 0.65
  • Maximum Current A – ≤ 1.2
  • Power Supply Current – ≤ 1.2
  • Port Size – 3/8″ FNPT
  • Dimensions L mm – 202
  • Dimensions H mm – 85
  • Dimensions W mm – 111
  • Weight kg – 2.1

 

  • Particle Filter – 5 micron polypropylene pre filter traps large particulates
  • Carbon Cartridges – Activated granular carbon and carbon block reduces chlorine, taste, odour and organic impurities
  • T33 Remineralisation Filter – Activated coconut Carbon shell gives a final polishing stage to assure a great taste
  • RO-1812-50 Membrane – RO Membrane Reduces heavy metals, salts, bacteria and viruses
  • 50gpd Booster Pump – Forces water through the system at a pressure that will guarantee optimum filtration
  • 6.5  litre (1.7 Gallon) Steel Tank – Stores ready to drink water below your sink
  • Push Lever Chrome Tap Use to have a dedicated pure water access on your countertop
  • RO and Filter Housing Spanners Making membrane and filter replacements quick and simple to carry out
  • 5M Tubing – 5 meters of 1/4″ tubing makes initial setup simple and accommodates for multiple locations
  • Flow Restrictor – Applies back pressure to the membrane to increase the permeate (pure) water production and decrease the concentrate (waste) water production.
  • Automatic Flush Valve – The ability for the system to automatically flush the RO membrane will prolong the life of the RO Membrane by reducing the chances of it fouling
  • Drain Saddle Valve – To connect the system waste outlet to your property’s drainage
  • Low Pressure Switch – Prevents the booster pump from becoming damaged due to low input water pressure
  • High Pressure Switch – Automatically switches the system off when back pressure is detected
  • Feed Water Connector – To connect the system inlet to your property’s water supply

You might also like

Product Search