RO-600 4 Stage Unpumped Reverse Osmosis System 600gpd (95lph)

From £235.99

  • Point of use (POU) systems filter out bad tastes, colours, odours and particulates
  • Up to 2,300 litres per day of refined water, ideal for window, car and glass cleaning, aquatic organisms, hydroponics and large households. As well as Brewing, Distilling and aiding Manufacturing Processes
  • Easy to transport and simple to setup on site

SKU N/A Category

The Unpumped Series are systems designed to work at UK mains pressure, granted this is at least 43 psi / 3 bar. If you have water pressure below this, we recommend a system from our Pumped Series. This variation is a point of use reverse osmosis system, ideal for household and commercial use when high volumes of refined water are required quickly. They will improve both the aesthetics of the water as well as removing any bad tastes or odours.

Larger than our slim range of systems, the RO-600 utilises a third stage of pre filtration in the form of granular activated carbon. Compared with only the two stages in our slim systems, this both prolongs the life of the RO membrane inside and also work more effectively to reduce chlorine levels within your water. All RO systems can be purchased with customisable consumables. Some are designed to target specific contaminants, eg. Chloramine, and others are rated at increasing efficiencies depending on the quality of your source water, and how long you would like your filters to serve for.


System Specifications:

  • System Dimensions mm – H 545 x W 375 x D 250
  • System Weight kg – 10.2
  • Inlet Feed Connection – 3/8″ Pushfit
  • Outlet Feed Connection – 1/4″ Pushfit


Membrane Specifications:

  • Permeate Flow Rate gpd (lph) – 300 (47)
  • Active Area m² – 1.26
  • Typical Rejection Rate – 96%
  • Maximum Recommended Recovery – 33%
  • Operating Pressure bar (psi) – 3 – 6 (43 – 87)
  • Operating Temperature °C (°F) – 5 – 45 (41 – 113)
  • Feed Flow Rate lpm – 1.9 – 9.1
  • Free Chlorine Tolerance ppm – <0.1
  • PH Range – 3 – 10
  • PH Range (Chemical Cleaning) – 2 – 11
  • Maximum Feed Silt Density Index SDI – 5
  • Maximum Feedwater Turbidity NTU – < 1
  • Recommended Shelf Life – 2 Years
  • Particle Filter – 5 micron polypropylene pre filter traps large particulates
  • Carbon Cartridges – Activated granular carbon and carbon block reduces chlorine, taste, odour and organic impurities
  • 2 x RO-3012-300 Membranes – RO Membrane Reduces heavy metals, salts, bacteria and viruses
  • RO and Filter Housing Spanners – Making membrane and filter replacements quick and simple to carry out
  • 10M Tubing – 5M of 1/4″ tubing and 5M of 3/8″ Tubing make initial installation simple and accommodates for multiple locations
  • 1800cc Flow Restrictor – Applies back pressure to the membrane to increase the permeate (pure) water production and decrease the concentrate (waste) water production.
  • Flush Valve – The ability of manual flushing regularly will prolong the life of the RO Membrane by reducing the chances of it fouling
  • Drain Saddle Valve – To connect the system waste outlet to your property’s drainage
  • Feed Water Connector – To connect the system inlet to your property’s water supply
  • Auto Shut off Valve – Will automatically switch the system off when back pressure is detected
  • Pressure Gauge – To Easily Identify the Working Pressure of the RO System

You might also like

Product Search