The Pumped Series are systems pre installed with RO booster pumps to supply the RO membrane with ideal pressure, ensuring optimum output from the system. All RO systems can be purchased with customisable consumables. Some are designed to target specific contaminants, eg. Chloramine, and others are rated at increasing efficiencies depending on the quality of your source water, and how long you would like your filters to serve for.
Larger than our slim range of systems, the RO-50MP utilises a larger final polishing stage with colour change deionisation resin, compared to only the smaller inline final stage in the slim systems. These types of systems range from our smallest of 50 gallons per day up to 100 gallons per day. Above this capacity, there is no deionisation resin stage and the third cartridge on the bottom housing is occupied by another pre filtration stage to aid the reverse osmosis process.
Do not run a pump continuously for more than 4 hours or allow a pump to run dry. Doing so will cause the pump to overheat and become damaged. So that you do not need to manually turn the system on and off every 4 hours, we suggest installing a timer to give the pump a thirty minute break so that it will cool down. We also recommend you install a low pressure switch before your pump so that it does not run dry with little feed flow. A pump should also be mounted using the built in mounting holes to stop the pump from getting damaged through uncontrolled vibration.
If any of the above directions are not followed, the warranty of the pump will be null and void. We will ask for evidence of you following the above directions and will not issue a warranty replacement without any.