RO-50 4 Stage Slim Reverse Osmosis System 50gpd (8lph)

From £69.99

  • Efficiently works at mains pressure (3 bar / 43 psi) requiring no pump or electrical components
  • Up to 200 litres per day of refined water, ideal for aquatic life, hydroponics, home brewing and steam irons
  • Inline Colour Change Deionisation resin stage completely removes TDS

SKU N/A Category

The Slim Series reverse osmosis systems make use of only two stages of filtration pre the reverse osmosis stage, as opposed to the more conventional three stages of pre filtration. This cuts the size of the system down considerably, making it is easier to fit into smaller working spaces. Also, the reduced weight and ability to operate at mains pressure (43 psi / 3 bar) increase the ease of initial setup and use throughout its service life.

This range of systems spans from our smallest of 50 gallons per day, up to our largest of 100 gallons per day, each contain a final polishing stage by utilising colour change deionisation resin. All RO systems can be purchased with customisable consumables. Some are designed to target specific contaminants, eg. Chloramine, and others are rated at increasing efficiencies depending on the quality of your source water, and how long you would like your filters to serve for. Never use Deionisation resin if you are intending to drink the treated water.

System Specification

  • System Dimensions mm – H 450 x W 355 x D 125
  • System Weight kg – 4.1
  • Inlet Connection – 1/4″ Pushfit
  • Outlet Connection – 1/4″ Pushfit

 

Membrane Specification

  • Permeate Flow Rate gpd (lph) – 50 (8)
  • Active Area m² – 0.36
  • Stabilised Rejection Rate – 96%
  • Maximum Recommended Recovery – 33%
  • Operating Pressure bar (psi) – 3 – 6 (43 – 87)
  • Operating Temperature °C (°F) – 5 – 45 (41 – 113)
  • Feed Flow Rate lpm – 1.9 – 9.1
  • Free Chlorine Tolerance ppm – < 0.1
  • PH Range – 3 – 10
  • PH Range (Chemical Cleaning) – 2 – 11
  • Maximum Feed Silt Density Index SDI – 5
  • Maximum Feedwater Turbidity NTU – < 1
  • Recommended Shelf Life – 2 Years
  • Particle Filter – 5 micron polypropylene pre filter traps large particulates
  • Carbon Cartridges – Activated carbon block reduces chlorine, taste, odour and organic impurities
  • RO-1812-50 Membrane – RO Membrane Reduces heavy metals, salts, bacteria and viruses
  • Inline DI Resin Stage – Final Water polishing will clean the last remaining ions in the water and will change colour when it needs replacing
  • RO and Filter Housing Spanners – Making membrane and filter replacements quick and simple to carry out
  • 5M Tubing – 5 meters of 1/4″ tubing makes initial setup simple and accommodates for multiple locations
  • Flow Restrictor – Applies back pressure to the membrane to increase the permeate (pure) water production and decrease the concentrate (waste) water production.
  • Flush Valve – The ability of manual flushing regularly will prolong the life of the RO Membrane by reducing the chances of it fouling
  • Drain Saddle Valve – To connect the system waste outlet to your property’s drainage
  • Feed Water Connector – To connect the system inlet to your property’s water supply

You might also like

Product Search