4 Stage Pumped Medical Reverse Osmosis System 50gpd (8lph) with Optional DI Resin Stage

From £179.99

  • Point of Use (POU) systems filter out bad tastes, colours, odours and particulates
  • RO booster pump guarantees optimum filtration by providing the RO membrane with perfect flow
  • Up to 200 litres per day of refined water for dentistry, microbiology, medicine, podiatry, tattooing, veterinary medicine, mycology and funerary practice
  • Easy to transport and simple to setup on site.

SKU N/A Category

Our RO Medical specially pairs our recommendation of RO system with the appropriate connections, supporting dentists and other sectors during CQC inspections. We would recommend that you arrange a plumber to install a 15mm double check valve (DCV) with a 3/4″ male washing machine connection to pass this aspect of the inspection.

Ultraviolet sterilisation is a well established process to rapidly disinfect water without the use of heat or chemical processes such as chlorination or ozonisation. UV does not add anything to water such as undesirable colours, tastes or odours and creates no by product.

The system is rated at 50 gallons per day and contains an option to include a final polishing stage by utilising colour change deionisation resin. All RO systems can be purchased with customisable consumables. Some are designed to target specific contaminants, eg. Chloramine, and others are rated at increasing efficiencies depending on the quality of your source water, and how long you would like your filters to serve for.

Pump Care

Do not run a pump continuously for more than 4 hours or allow a pump to run dry. Doing so will cause the pump to overheat and become damaged. So that you do not need to manually turn the system off every 4 hours, we suggest installing a timer to give the pump a thirty minute break so that it will cool down. We also recommend you install a low pressure switch before your pump so that it does not run dry with little feed flow. A pump should also be mounted using the built in mounting holes to stop the pump from getting damaged through uncontrolled vibration.

If any of the above directions are not followed, the warranty of the pump will be null and void. We will ask for evidence of you following the above directions and will not issue a warranty replacement without any.

System Specifications:

  • System Dimensions mm – H 440 x W 360 x D 200
  • System Weight kg – 13.8
  • Inlet Connection – 1/4″ Pushfit
  • Outlet Connection – 1/4″ Pushfit
  • Tank Dimensions mm – H 380 x Diameter 290
  • Tank Weight kg – 3.9
  • Tank Capacity l (G) – 6.5 (1.7)
  • Tank Material – Stainless Steel


Membrane Specifications:

  • Permeate Flow Rate gpd (lph) – 50 (8)
  • Active Area m² – 0.36
  • Stabilised Rejection Rate – 96%
  • Maximum Recommended Recovery – 33%
  • Operating Pressure bar (psi) – 3 – 6 (43 – 87)
  • Operating Temperature °C (°F) – 5 – 45 (41 – 113)
  • Feed Flow Rate lpm – 1.9 – 9.1
  • Free Chlorine Tolerance ppm – <0.1
  • PH Range – 3 – 10
  • PH Range (Chemical Cleaning) – 2 – 11
  • Maximum Feed Silt Density Index SDI – 5
  • Maximum Feedwater Turbidity NTU – < 1
  • Recommended Shelf Life – 2 Years


Pump Specifications:

  • Pump Model – TYP-2500
  • Flow gpd (lph) – ≥ 200 (31.5)
  • Inlet Pressure bar (psi) – 2.1 (30)
  • Working Pressure bar (psi) – 5.6 (80)
  • Voltage V DC – 24
  • Power Supply Voltage – 24
  • Working Current A – ≤ 0.65
  • Maximum Current A – ≤ 1.2
  • Power Supply Current – ≤ 1.2
  • Port Size – 3/8″ FNPT
  • Dimensions L mm – 202
  • Dimensions H mm – 85
  • Dimensions W mm – 111
  • Weight kg – 2.1
  • Particle Filter – 5 micron polypropylene pre filter traps large particulates
  • Carbon Cartridges – Activated granular carbon and carbon block reduces chlorine, taste, odour and organic impurities
  • RO-1812-50 Membrane – RO Membrane Reduces heavy metals, salts, bacteria and viruses
  • 50gpd Booster Pump – Forces water through the system at a pressure that will guarantee optimum filtration
  • 6.5  litre (1.7 Gallon) Steel Tank – Stores ready to drink water below your sink
  • Push Lever Chrome Tap – Use to have a dedicated pure water access on your countertop
  • RO and Filter Housing Spanners – Making membrane and filter replacements quick and simple to carry out
  • 5M Tubing – 5 meters of 1/4″ tubing makes initial setup simple and accommodates for multiple locations
  • Flow Restrictor – Applies back pressure to the membrane to increase the permeate (pure) water production and decrease the concentrate (waste) water production.
  • Low Pressure Switch – Prevents the booster pump from becoming damaged due to low input water pressure
  • High Pressure Switch – Automatically switches the system off when back pressure is detected
  • Automatic Flush Valve – The ability for the system to automatically flush the RO membrane will prolong the life of the RO Membrane by reducing the chances of it fouling
  • Drain Saddle Valve – To connect the system waste outlet to your property’s drainage
  • Feed Water Connector – To connect the system inlet to your property’s water supply
  • DI Resin Stage (Optional) – Final Water polishing will clean the last remaining ions in the water and will change colour when it needs replacing

You might also like

Product Search