10" x 2.5" Triple MB-151 Deionisation Resin System

From £95.99

  • 100% Virgin (Non Regenerated) Resin
  • Specifically designed for treatment of hard water (>250ppm)
  • Mixed bed in a 1.5 : 1 ratio of strong acid cations and strong base anions

SKU N/A Category

An alternative to water treatment systems is our stronger grade of resin, widely used in household and commercial settings when using untreated source water and popular for personal glass, window and car cleaning but also a force in the industry of window cleaning and car detailing.

This resin deals well with the stubborn ions within water with a TDS value of over 250ppm, usually treating and purifying water directly from a tap feed, and boasts a large service life whilst packing a punch of power. By being of such low concentration of ions, treated water from this resin
aggressively draws out the contaminants from the surroundings and surfaces it is cleaning to leave a dirt and streak free shine.

Our deionisation resin is expertly produced in two grades: Performance DI and High Performance DI. Both are virgin (non regenerated), mixed bed resins designed for the most efficient treatment of water whilst being capable of the highest capacities. In both outcomes, our resin will produce pure water with extremely low values of electrical conductivity (EC) and total dissolved solids (TDS). High Performance DI resin achieves its power using a mix of of strong acid cation and strong base anion resins in a 1.5 : 1 ratio.

Applications

  • Window Cleaning
  • Car Cleaning / Detailing
  • Industrial Cleaning

System Specification

  • Operating Pressure psi (bar) – < 125 (< 8.6)
  • Operating Temperature °C (°F) – 2 – 50 (35.6 – 122)
  • Sump Material – Polypropylene (PP)
  • Head Material – Polypropylene (PP)
  • Thread Material – Brass
  • Pressure Relief Valve – Plastic Button with metal screw
  • Number of O-Rings – 1 Per Housing
  • O-Ring Material – NBR
  • Thread Size – 1/2″ Female BSP Thread
  • Weight kg – 5.9
  • Dimensions mm – H 375 x W 410 x L 165

Media Specification

  • Appearance – Spherical Beads
  • Type – Gel
  • Matrix – Crosslinked Polystyrene
  • Particle Size Range mm – 0.3 – 1.2
  • Moisture Holding Capacity % – 47 – 60
  • Maximum Operating Temp °C (°F) – 60 (140)

 

You might also like

Product Search