RO booster pump for 50gpd (US Gallons) reverse osmosis filter systems, complete with power supply and 1/4" connections.
Booster pump and power supply, which will suit a 50gpd (US Gallons) RO filter system. This is as fitted to our reliable Vyair reverse osmosis water filters. These are optimised to work with most standard unpumped RO water filters. Supplied with 1/4" push fit pipe fittings.
Notice: Please ensure that you select the correct capacity pump for your reverse osmosis system, for example a 100gpd pump for a 100gpd unit.
If the incorrect pump is selected, you may experience water quality and production issues with your reverse osmosis system.
Do not run a pump for more than 4 hours continuously.
This is to stop the pump from overheating and becoming damaged.
To achieve this, we would suggest installing some form of timer, so that after 4 hours of operation the pump has a 15-30 minute break. This will enable the pump to cool down.
The warranty for the pump would be null and void if no timer is used. If there is an issue with the pump we would ask for evidence of a timer being used to allow the item to be covered by the warranty
Do not allow the pump to run dry (without an active water source) as this will damage the pump.
The only time that we would suggest running the pump without an active water supply is if you have a low pressure switch wired into the pump, as this will automatically switch the pump off when the incoming water flow is turned off.
The warranty for the pump would be null and void if used in an application of running dry without a low pressure switch- We will ask for evidence of use of a low pressure switch to receive a warranty replacements of the pump
We suggest that the pumps are permanently mounted. This is to stop any potential for the pump to vibrate and become damaged
We will ask for evidence of how the pump is mounted for the item to be covered by its warranty.
|Is Free Shipped||No|