We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
RO-600 4 stage 600GPD reverse osmosis water filter system with in-built pressure gauge suitable for use with aquariums, drinking water, pharmaceuticals, plant propagation and window cleaning.
This RO-600 professional 4-stage water filtration system is economical and easy to use. It thoroughly purges your water of various types of pollution.
The filtration process is based on three in-line cartridges. This system will reduce and remove impurities such as sand, rust, suspended particles to the size of 5 microns, chlorine, organic matter, reduce the hardness of your water and improve its taste and aroma. An advantage of this system is that it has a wide range of interchangeable water filter cartridges, so the system can be freely configured according to your needs with the use of sediment, speciality and carbon filter cartridges.
Two high quality “three-layer-configuration" composite membranes, each of which consist of a thin polymer layer deposited on top of a porous polymer layer on top of a non-woven fabric support sheet, facilitate the reduction and removal of mechanical impurities, bacteria and viruses. A further key feature of this system is an in-built pressure gauge which allows for pressure drop monitoring.
System Specifications:
Recommendations for Use:
Complete Package Contains:
STAGE, PART#, COMPONENT, FUNCTION:
Important: Do not use with water that is micro-biologically unsafe or of unknown quality without adequate disinfection before or after the system. Water filtration systems can help reduce the presence of contaminants. In addition, some water filtration systems can help reduce the presence of micro-organisms or other contaminants that pose potential health risks.
Limited Warranty: Vyair warrants that this product is free from defects in materials and workmanship. This warranty, together with any and all warranties implied by law, shall be limited to a period of twelve (12) months from the date of original purchase. This limited warranty does not apply to failures that result from abuse, misuse, alteration or failure to properly comply with installation, or cartridge change instructions. Vyair strongly recommends adding to all point of use filtration systems a Pressure Limiting Valve (contact us for further details) to guard against unwanted extreme water pressure events, pressure increases, surges, and water hammer which could occur in the water pipes. Not having one installed could mean that if you ever did have to claim damage caused by a burst water filter system, your claim could be denied.
What should my water pressure be?
Between 3-4 bar. If between 1-3 bar, consider a pumped system.
What Gallon-Per-Day (GPD) is this system?
This is a 600GPD system.
How often should I replace the filters?
Change the pre-filters every 6 months or their recommended lifespans (whichever comes first).
How often should I replace the membrane?
The membrane should be replaced every 12 months (as long as regular maintenance of the pre-filters and flushing is completed, see above for average life-span).
How quickly does this system make water?
This system produces water at a rate of 94.5 litres per hour (LPH). This is providing that you are running the unit in optimum conditions with the correct water pressure and water temperature.
What is the waste water to pure water ratio of this unit?
This unit has a waste to pure ratio of 3:1, meaning 3 litres of waste water to every 1 litre of pure water (running at optimum conditions).
Troubleshooting steps if the unit isn't working - Initial Checks
What information will be needed when requesting technical advice?
FAQ Tab | What should my water pressure be? Between 3-4 bar. If between 1-3 bar, consider a pumped system. What Gallon-Per-Day (GPD) is this system? This is a 600GPD system. How often should I replace the filters? Change the pre-filters every 6 months or their recommended lifespans (whichever comes first).
How often should I replace the membrane? The membrane should be replaced every 12 months (as long as regular maintenance of the pre-filters and flushing is completed, see above for average life-span). How quickly does this system make water? This system produces water at a rate of 94.5 litres per hour (LPH). This is providing that you are running the unit in optimum conditions with the correct water pressure and water temperature. What is the waste water to pure water ratio of this unit? This unit has a waste to pure ratio of 3:1, meaning 3 litres of waste water to every 1 litre of pure water (running at optimum conditions). Troubleshooting steps if the unit isn't working - Initial Checks
What information will be needed when requesting technical advice?
|
---|---|
Is Free Shipped | No |