12L per Minute 100PSI High Pressure Water Transfer Pump

100 PSI Vyair pressure pump providing 12 Litres per minute flow with a 12V DC operation.

This is a quality pump manufactured by one of the world's leading water pump manufacturers. This pump is designed to give long term consistent reliability. This is a reliable, sensibly priced, easy to maintain 12 volt pump.

Technical Specification

• 12 volt 14 amps 
• 12 litres per minute open flow rate 100PSI pressure rating 
• 1/2" BSP female fittings supplied also with 1/2" male to barbed hose connection 
• Suitable for use with most pump controllers 
• Pressure switch 100psi turns off 80psi turns back on 
• Weight 2.3kgs 
• CE certification & Rohs Compliant
• 12 months No Quibble service guarantee if used in accordance with designed purpose

Please Note: This pump is NOT designed to be used as a window cleaning pole pump (to pump water up the pole). It is only designed to be used as a water transfer pump. If it is used for this application, the warranty will be voided and no returns accepted.

Pump care:

Do not run a pump for more than 4 hours continuously.

This is to stop the pump from overheating and becoming damaged.

To achieve this, we would suggest installing some form of timer, so that after 4 hours of operation the pump has a 15-30 minute break. This will enable the pump to cool down.

The warranty for the pump would be null and void if no timer is used. If there is an issue with the pump we would ask for evidence of a timer being used to allow the item to be covered by the warranty.

Do not allow the pump to run dry (without an active water source) as this will damage the pump. 

We suggest that the pumps are permanently mounted. This is to stop any potential for the pump to vibrate and become damaged.

We will ask for evidence of how the pump is mounted for the item to be covered by its warranty.