Trustpilot
Share

10" x 2.5" Refillable Insert Filled with Fluoride Removal Resin

£50.59 £42.16
In stock
SKU
FIL-RO-0590

Description

 

Our refillable inserts with INDION RS-F de-ionising resin are for use with drinking water systems to remove fluoride and ensure safe levels. Designed for use in one of our filter housings, it can be used in an under-sink drinking water system or as a pre-filtration stage for reverse osmosis water filtration. The media is comprised of opaque off white beads that attract the negatively charged fluoride ions. This is perfect for people concerned about fluoride intake.

 

Resin performance varies on external factors in the water supply such as temperature, pH, water quality, flow rate and TDS. We would recommend changing the cartridge every 6 months to a year. If you need more specific advice based on local water supply, please don’t hesitate to get in touch via phone (01507 524576), email ([email protected]) or on one of our social media channels.

 

Flouride

 

Flouride has a mitigating effect against dental caries at safe levels. Excess levels of fluoride (>1.5mg/L) are harmful to human health if consumed in drinking water, leading to dental fluorosis, or skeletal fluorosis at worse. Desirable amounts of fluoride in drinking water is 1.0mg/l.

 

Media

 

INDION RS-F is specifically designed to target and eliminate fluoride from potable water sources with fluoride content up to 20 ppm maximum. The resin also performs in the presence of common anions like sulphates and chlorides. Life of the resin is 2-3 years and can be disposed safely in landfill.

 

Operating parameters

 

Maximum operating temperature: 60˚C

Operating pH range: 5.5 to 8.5

Fluoride adsorption capacity: 1 - 2 g/l

Recommended contact time: 5 minutes

Specific service flow rate: 10 -15 BV/h Minimum bed depth: 0.4 m

 

Storage and Safety

 

Ion exchange resins must be properly cared for. Do not allow resin to dry. Check resin frequently and add clean demineralised water if not moist. Resin must be stored out of the light. Recommended temperature for storage is between 20-40˚ C.

 

Acidic/alkalinic regeneration solutions are corrosive and should be used with protection for skin and eyes.

 

 

 

Write Your Own Review
You're reviewing:10" x 2.5" Refillable Insert Filled with Fluoride Removal Resin
Your Rating
More Information
Is Free ShippedNo