EcoAqua EWF-8003A Compatible with 3M AP Easy Complete, Sub-Zero 4204490 & InSinkErator F-2000 Water Filter

The EcoAqua EWF-8003A filter was designed to replace a range of Sub-Zero filters and the 3M AP Easy complete. A complete list can be found in the "What will it fit?" tab.

The EWF-8003A removes a wide range of contaminants and impurities from your water supply through the use of a high-quality sintered carbon block, improving the taste and odour of your water. This also leaves minerals in the water that may be beneficial.

This filter has has been WRAS certified, ensuring this product will not leave any harmful content in your water supply.

We recommend replacing this filter every 6 months to ensure your water is as good as it can be.

Operating Specifcations:

• Minimum operating temperature: 0.6°C/33°F
• Maximum operating temperature: 38°C/100°F
• Minimum working pressure: 210 kPa/30 psi
• Maximum working pressure: 689 kPa/100 psi
• Rated capacity: 1,892 litres/500 gallons
• Flow rate: 2.85 lpm/0.75 gpm

Installation and replacement procedure for the EWF-8003A fridge water filter:

• Lift the grille assembly.
• Slowly rotate the old filter cartridge 1/4 turn counterclockwise. Do not pull.
• Line up the new cartridge so that the locking tabs can be inserted into the filter head.
• Rotate the filter cartridge into the base about 1/4 turn clockwise until it stops. Do not overtighten.
• The first full bucket of ice produced should be discarded. This will help clean the water system and clear air from the line.
• Once the filter cartridge has been replaced, the control automatically resets the water filter life monitor and the 'REPLACE FILTER' indicator will no longer be displayed.