EcoAqua EWF-8001A Water Filter Compatible with InSinkErator (ISE) F-701R Steaming Hot Water Tap & More

This is an undersink filter cartridge by EcoAqua, designed as a replacement for the Insinkerator F701R model. By using a high quality carbon filtration block, this filter works by removing hazardous material from your mains water supply and leaving you with clean, fresh drinking water. 

Easy to install and maintain; merely twist the filter out and replace when necessary. Like the original, we recommend that you replace this every 6 months to ensure the best possible quality water. We keep this filter in stock at all times, and will dispatch immediately.

Although this is a compatible product, it has gone through long and arduous testing to become WRAS certified. This is a guarantee that this filter is produced from non-toxic materials and cannot leak any contaminants back into your water supply. 

Technical Specifications:

• Operating Temperature: Min. 0.6 °C / 33 °F Max. 38 °C / 100 °F
• Working Pressure: Min. 140 kPa / 20 psi Max. 827 kPa / 120 psi
• Rated Capacity: 7,600 litres / 2,010 US gallons
• Flow Rate: 2.8 lpm / 0.7 gpm

Installation and replacement procedure for the EWF-8001A water filter cartridge:

• Water filter cartridge must be installed in vertical orientation to ensure optimum performance.
• Turn the old cartridge by 90 - 180 degrees anti-clockwise (water supply must first be shut off at mains source).
• Gently pull the old water filter out and discard.
• Remove the protective red cap from the new filter.
• Insert new filter cartridge into filter head.
• Twist clockwise by 90 - 180 degrees until 'LOCK' arrow on the filter aligns with arrow on bracket.
• Switch on water supply at mains source.
• Run water through the filter tap for 3 minutes to purge the system.
• Apply the "change filter" reminder sticker, for next filter change.