Solution Production

Plant nutrients used in hydroponics and aeroponics are dissolved into pure water to create bespoke nutrient solutions. These are applied relatively to the crops and balanced throughout their growth to obtain the highest possible yield. If the water used to manufacture these solutions is of poor quality, it can cause issues such as stunted growth, nutrient deficiencies and bacterial contamination.

To ensure that the water used during the nutrient manufacture process is of the optimum quality, we would recommend using a reverse osmosis system followed by a deionisation resin stage. This will provide you with water that has a TDS reading of 0ppm and will be free from chlorine, organics and heavy metals. If you are experiencing high levels of chloramine, nitrates, fluorides or bacteria, please refer to our Heavy Organics Removal page.

Treatment Process

1

Particle Removal

Our cartridges offer outstanding absorption of sediment, dirt, sand and scale flakes to prevent filtration systems from blockage and microorganism growth.

2

Chlorine and Organics Removal

Carbon cartridges are a long established choice for the reduction and removal of chlorine, VOCs and heavy metals whilst reducing water hardness.

3

Reverse Osmosis

Pure water (permeate)  is produced during reverse osmosis by applying pressure to force water through a semi permeable membrane, leaving a majority of the present ions and dissolved solids on the other side to drain as waste (concentrate).

4

Post RO Deionisation

Our performance mixed bed resin is specially designed for deionisation directly after reverse osmosis. It holds a 1 : 1.5 ratio of strong acid cations and strong base anions to attract and remove all ions, salts and dissolved solids.

Recommended Products

Product Search

Contact us

Name