Autoclave Feed

An autoclave is a machine that is commonly used within a dental surgery to clean equipment via the use of high pressure, sterilised steam. Due to the boiling temperatures that water is heated to, the autoclave is prone to particle and mineral build up within the machine. This is more commonly known as scale, and it can reduce the service life of the autoclave. More importantly, scale leads to malfunctions and the improper sterilisation of equipment, resulting in cross contamination.

To purify the water to this level and ensure no scale build up, particulates and organics need to be removed from the water before the reverse osmosis stage. This will further the filtration by removing ~99% of bacteria, ions and dissolved solids from the water. A final polishing stage removes all remaining salts and ions using deionisation resin.

Treatment Process

1

Particle Removal

Our cartridges offer outstanding absorption of sediment, dirt, sand and scale flakes to prevent filtration systems from blockage and microorganism growth.

2

Chlorine and Organics Removal

Carbon cartridges are a long established choice for the reduction and removal of chlorine, VOCs and heavy metals whilst reducing water hardness.

3

Reverse Osmosis

Pure water (permeate)  is produced during reverse osmosis by applying pressure to force water through a semi permeable membrane, leaving a majority of the present ions and dissolved solids on the other side to drain as waste (concentrate).

4

Post RO Deionisation

Our performance mixed bed resin is specially designed for deionisation directly after reverse osmosis. It holds a 1 : 1.5 ratio of strong acid cations and strong base anions to attract and remove all ions, salts and dissolved solids.

Recommended Products

Product Search

Contact us

Name