Flow totaliser and flow rate meter to measure low flow rates, from 0.8 to 8.0 litres/min (model 6710M-TM 1/4" BSP). This flow meter can also be used with a mains power adaptor (see below to purchase)
This digital flow meter is designed to be installed in a purpose made hole in a panel, this allows a very neat design if you are building a particular water system. The device is battery operated and is delivered with a battery holder. This flow meter is manufactured by the reputable Taiwanese electronics company, DigiSavant, for whom we are authorised UK distributors.
Flow totaliser and flow rate meter to measure low flow rates, from 0.8 to 8.0 litres/min. It is suitable to measure reverse osmosis water system outputs. The totaliser will display up to 99,999 litres, and has automatic data memory for when the battery power is off. This is a count up flow controller that counts the total volume going through it, hence described as count up. This flow meter will record the volume of water passing through it, but you will need to press the button to show the actual live flow at that moment. This water flow meter has 1/4" BSP male threaded fittings, suitable for most plumbing connections.
- Flow rate display, 0.8 to 8.0 litres per minute
- 1/4" BSP fittings
- Cable length: 65 cm
- Battery or mains operated
- Delivered with battery holder requires two AA batteries (not included)
- Low battery power alert
- Operating current: 4.0 mA (work), 0.015 mA (sleep)
- Operating voltage: 3 DC volts
- Automatic data memory