Digital volume totaliser and flow meter with LCD display, suitable for water filter systems with a very low flow rate, 1.5 to 25.0 Litres per minute, this includes reverse osmosis water filtration units. The meter is fitted with 1/2" male BSP connections and a 1.5 meter cable between the monitor and sensor.
This meter is a count up meter, so it will tell you the volume of water that has passed through the meter since installation (or since resetting the meter), as well as displaying the live flow rate. Knowing these exact values allow you to know exactly when it is time to change your filters, making sure you are not wasting money on an early filter change, or maintenance on a unit where the filters have been changed far too late.
The meter can also tell you the live flow rate going through the meter (in litres/min) and measures the length of time. The total volume and time elapsed can be set independently, or one of them can be turned off if required.
The meter is simple to use and comes with comprehensive instructions. It is suitable for water dispensers, water filters, aquatic filtration systems and other low flow water systems.
- Filter capacity life monitor, from 500 to 99,500 litres
- Filter elapse time monitor, from 30 to 720 days
- Flow rate display, 1.5 - 25L/min
- Near end of filter life alert
- End of filter life alert
- Cable length: 150 cm
- Battery operated, 2 AA batteries (included)
- Low battery power alert
- Automatic data memory