10" HMA 3-Stage Pond Dechlorinator consisting of three standard 10" filter housings to meet all customer's fixed-capacity filtration needs.
This system consists of three standard 10" filter housings to meet all customer's fixed-capacity filtration needs. This system is dedicated for regular flow, cold water on commercial and industrial applications. The housings are compatible with a broad range of 2.5” x 10" type cartridges widely available on the market.
The three filter housings consist of housing sump and filter head with hozelock clunk-click fittings on the inlet (enabling quick connection of a standard size garden hose). The outlet is equipped with a 1/2" x 1/4" tap to control flow, while two of the three filter housings are supplied in blue colour, which protect the filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The innovative design of the filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests).
The third filter housing is supplied in transparent food-grade plastic for visual monitoring of the condition of the sediment filter cartridge inside. Since the sediment filter collects most of the particulates and suspended solids from the feed water, the cartridge is more likely to exhaust quicker and need replacing more often. The transparent housing allows the user the monitor the condition of the sediment filter and determine when replacement of the cartridge is required.
Pack 1 (contains the following):
Pack 2 (contains the following):
Depending on level of water contamination, system can be configured with sediment and carbon or specialty media cartridges. System is offered with the additional option of a 0.8 to 8.0 litres/minute DigiFlow 6710M Digital Micro Flow Totalizer (Count Up) and Flow Rate Meter with 1/4" BSP Male Connections. The most significant features of the flow rate meter include flow totalizing up to 99,999 litres with real-time flow rates displayed from 0.8 to 8.0 litres/min. Data is automatically memorized whenever the battery power is switched off and it is also equipped with a low power battery alert signal. The meter can be compact mounted on a nearby wall or DIN rail inside a cabinet if required.
The complete kit also comes supplied with 3 metres of 1/4" LLDPE (Linear Low Density Polyethylene) water filter pipe to assist with connection.
Important: Do not use with water that is micro-biologically unsafe or of unknown quality without adequate disinfection before or after the system. Water filtration systems can help reduce the presence of contaminants. In addition, some water filtration systems can help reduce the presence of microorganisms or other contaminants with potential health effects. We strongly recommend regularly scheduled maintenance and replacement of the filter cartridge in order for the product to perform properly. Replace the filter cartridge at least every 3 or 6 months (depending on water quality and water consumption)
|Is Free Shipped||No|