10" clear filter housing with either 1/2", 3/4" or 1" inlets/outlets as well as the mounting bracket and filter spanner. This can be used with water filters, reverse osmosis, aquatic filtration and more. A DI insert can be purchased and used as DI filter filter.
This housing is delivered complete with a housing spanner, bracket and mounting screws. The easy fit design allows you to change filters within the height of the filter. Unscrew the lower blue ring with the filter spanner, and then remove the filter bowl sideways and change the filter. Reinstallation is a reversal of undoing process.
- 10" clear housing with easy change filter system
- 1/2", 3/4" or 1" brass inlets and outlets
- Includes mounting bracket, screws and housing spanner
- Max. temperature: 60°C
- Max. pressure: 7 bar
Please select what size brass inlet/outlets you require from the dropdown menu.
IMPORTANT: The pressure should not exceed 7 bar at any time. We recommend the installation of a 3 bar pressure regulator between the water supply and filter, as this will prevent a water hammer from your mains water supply that may damage this filter housing.